Zep Commercial Floor Finish

Floor Finish, Wet-Look

Weight: 128 fl oz (1 gl) 3.78 lt

Directions

1. Strip floor using Zep Commercial Heavy Duty Floor Stripper. 2. Apply 1-2 coats of Zep Commercial Stain Resistant Floor Sealer. 3. Pour Zep Commercial Wet Look Floor Finish into a clean bucket. Using a dry rayon string mop, apply 4 thin coats of finish. To achieve a thin, even coat, move the mop in a continuous figure 8 motion. Allow to dry completely between coats to prevent hazing and to ensure adhesion; Approximately 30 minutes under normal conditions. Do not use fans to reduce drying time; Finish needs to cure on its own. 4. Zep Commercial Wet Look Floor Finish should be maintained by frequent dust mopping and daily damp mopping with Zep Commercial Neutral Floor Cleaner. Keep floor dust free. Maintain by dry burnishing with a beige pad. Best results are obtained if burnished 2 to 3 times each week. Handling & Storage: Keep container closed when not in use. Store in a cool, dry, well-ventilated place. Do not reuse empty container. Keep out of reach of children and pets. Protect from freezing.

Product Details

Professional Strength. Covers up to 2,000 sq. ft. Step 3: Finish. Long lasting high gloss shine; Slip and scuff resistant. Zep Commercial Wet Look Floor Finish contains 20% solids and is formulated to dry quickly into a high gloss, wet look coating. This commercial quality finish resists scuffs and black heel marks and responds excellently to ultra high-speed burnishing for moderate maintenance procedures. For use on: Interior floors such as rubber, asphalt tile, vinyl, vinyl composition, sealed concrete, terrazzo and no-wax vinyl floors. Not for use on: Wood, marble, granite, natural stone, painted or stained concrete, glazed ceramic tile and newer no-wax vinyl floors. No phosphates. Made in USA.

 

Warnings

Eye irritant. May cause irritation to skin and mucous membranes. Contains glycol ethers. Avoid contact with eyes and prolonged contact with skin. Avoid breathing vapors or spray mists. Use only with adequate ventilation. First Aid: Eyes: Flush with plenty of water for at least 15 minutes. Get medical attention immediately. Skin: Flush skin with plenty of water. Get medical attention if irritation develops. Inhalation: Get to fresh air. If irritation persists, get medical attention. Ingestion: Do not induce vomiting. If person is conscious, give plenty of water to drink. Get medical attention. For emergency medical assistance, call your local Poison Control Center or 1-877-541-2016.

Manufacturer

Zep Commercial/Acuity Specialty Products Group
PO Box 1060 Cartersville, GA 30120-1060 888-805-HELP

UPC

021709009637