Morton Rust Stain Remover

Rust Stain Remover, Rust Raze

Weight: 20 oz (1 lb 4 oz) 567 g

Directions

Read directions thoroughly before use. Use dry measuring cup. For difficult stains, increase amount and/or contact time. White & Colored Fabric: Whites: Dissolve 1/2 cup into luke warm water as washer is filling. Allow clothes to soak for 5 minutes. Add detergent and resume wash/rinse cycle. Dry as usual. Colors: Test all colors before using. Use only on color fast dyes. Wash each item separately using white clothes instructions. Do not use with bleach or peroxide. May damage some colors. Tub, Sink, Tile: Wet area to be cleaned. Apply powder to damp sponge or cloth. Rub lightly until stains are gone. Rinse thoroughly. Not recommended for older or worn porcelain. Toilet Bowl & Water Tank: Remove any cleaners or deodorant from bowl or tank. Flush. Bowl: Add 1/2 cup to water in bowl. Scrub stained area with brush. Let stand until stains are gone. Tank: Raise water level above stain line if possible. Add 1/2 cup to tank. Let stand until stains are gone. Exterior Surfaces: Wet area to be cleaned. Apply powder to damp sponge or cloth. Rub lightly until stains are gone. Rinse thoroughly. Dishwasher & Washing Machine: Add 1/4 cup to empty machine. Run machine through normal cycle using water only. Do not open machine until cycle is complete. Water Softener. First Application: Dissolve 1/2 cup in 1/2 gallon luke warm water. Pour directly into brine well (for softeners with no brine well, pour directly into salt tank when salt level is low). Manually regenerate softener. Repeat treatment for heavily fouled resin. Regular Use: Dissolve 1/4 cup in 1/2 gallon luke warm water and follow first application instructions. Store in cool, dry place.

Product Details

Removes household rust stains and cleans water softeners.

 

Warnings

Eye and skin irritant. Harmful if swallowed. Vapor harmful. Contains sodium hydrosulfite. Keep covered when not in use. Rubber gloves are recommended. Use adequate ventilation. Avoid breathing vapors after mixing with water. People with respiratory problems or sulfite sensitivity should not use this product. Do not mix with any other chemical or cleaner. Mix in large, open plastic container. Avoid spills. Unused product should remain in original container. Keep out of reach of children. First Aid: In case of eye contact, rinse thoroughly with water for at least 15 minutes. Get prompt medical attention. In case of skin contact, rinse with cool water. If swallowed, give plenty of water or milk and call physician or local poison control center immediately.

Manufacturer

Morton International, Inc.
Chicago, IL 60606-1743 800-725-8847

Copyright 2008 Morton International, Inc.

UPC

024600080033