Crown Lamp Oil

Lamp Oil, Ultra Refined, Clear Unscented

Weight: 32 fl oz (0.946 lt)

Directions

Remove chimney and fill base with Crown Lamp Oil. Do not overfill. Lamp oil level should be at least 3/4 in below top of neck. Screw burner assembly back into base. Allow 5 minutes for wick to absorb oil. Raise wick to light. Once lit, replace chimney and adjust wick so that it does not extend above the top of the metal combustion chamber. Wick height is extremely important. The wick should never be visible above the dome of the burner. A high flame will cause smoke or soot damage. If any smoke or soot is observed, immediately lower wick until all smoke has ceased. Failure to follow these directions could result in severe smoke damage.

Product Details

Crown Lamp Oil is recommended for only those oil lamps that have a mechanical metal burner. Do not use this oil in oil candles because severe soot and smoke damage will occur. Class III-A combustible liquid. Made in the USA.

 

Warnings

Combustible. Keep away from heat, sparks and flame. Use with adequate ventilation. Harmful or fatal if swallowed. Contains petrolatum distillates. Do not take internally. Avoid prolonged breathing of vapors or mist. Avoid contact with eyes or prolonged contact with skin. If there appears to be a malfunction, extinguish the lamp immediately. Never leave a burning oil lamp unattended. Do not store oil near heat or open flame. Never use gasoline, alcohol, or any solvent as a fuel in any oil lamp. Do not mix with any other product. Do not reuse this container. Keep out of reach of children. First Aid: If swallowed, do not induce vomiting, call poison control center, emergency room or physician immediately. In case of eye contact, immediately flush eyes with running water for at least 15 minutes. If irritation persists, get medical attention.

Manufacturer

Consumer Products/Packaging Service Co., Inc.
Pearland, TX 77581

UPC

023857333428