Camco Precision Curved Ball Levels, 2 Pack
2 levels
On This Page
Directions
Adhesive Installation: (1) Park RV or trailer and level front-to-back and side-to-side with a carpenter's level. (2) Choose area to install level. (3) Thoroughly clean and dry surface. (4) Remove liner paper to expose adhesive backing. (5) Align ball to 0 degrees. (6) Press firmly into place. (Permanent bond to most surfaces in 72 hours.) Note: Warm surface if extremely cold. Permanent Installation: (Requires (2) No.4 flat head screws x 1/2 inch long, not included) (1) Park RV or trailer and level front-to-back and side-to-side with a carpenters level. (2) Choose area to install level. (3) Mark and drill only one hole with 3/32 inch diameter drill bit. (4) Attach one side of level with screw. (5) Align ball to 0 degrees, mark and drill second hole. (6) Install second screw.
Product Details
Go RVing. RVs and trailers should be levelled front-to-back and side-to-side to allow systems to function properly. Limited Warranty: Camco warrants this product to be free from defects in material and workmanship under normal use and service conditions for 12 months from the date of first purchase. Camco's liability is limited solely to the replacement of any defective product returned to us. To the extent allowable by law, Camco makes no other warranty, either expressed or implied. nor assumes any liability for incidental or consequential damages resulting from the use of this product or for breach of warranty of merchantability or fitness for a particular purpose. Submit warranty claims to Camco manufacturing, 121 Landmark Drive, Greensboro, NC 27409. www.camco.net. Made in China.Nutrition Facts
Warnings
Note: Warm surface if extremely cold.Manufacturer
Camco Manufacturing, Inc.
121 Landmark Drive Greensboro, NC 27409
UPC
00014717255530