Otis Rifle Cleaning Kit, 0.22 Cal, 5.56 mm
1 kit
On This Page
Directions
Cleaning Instructions: Cleaning your firearm regularly will prevent the buildup of powder, lead and copper fouling, which can greatly reduce accuracy and damage the bore of your gun. Cleaning (Use a gun cleaning mat to catch debris). Be sure your firearm is unloaded. If needed, refer to your firearm owner's manual for disassembly instructions. Bore: 1. Assemble cleaning rod and 2 component adapter. 2. Attach jag and push a patch over the pierce point. Be sure to pierce the center of the patch (make sure patch is not too snug in barrel-trim to fit if needed). saturate Shooter's Choice with FP-10 lubricant elite CLP and push through barrel. 3. Attach bore brush and run through barrel several times to loosen caked fouling. 4. Reattach jag with clean saturated patch and run through barrel. 5. Finish by pushing a dry patch through bore to remove remaining solvent. Receiver/action: Clean receiver and action parts with an all purpose brush and Shooter’s Choice FP-10 lubricant elite CLP to remove powder fouling, dirt and surface rust. Lubricating: Apply a thin layer of Shooter’s Choice FP-10 lubricant elite CLP to all moving parts to provide lubrication. Protecting: Apply Shooter’s Choice FP-10 lubricant Elite CLP to all metal surfaces to provide protection against corrosion. Use saturated mop to coat the entire length of barrel.
Product Details
Rifle cleaning kit with 5 brass rods. 0.22. 0.223 cal. 5.56mm. Cleaning Kit Includes: Bronze brush. Cotton mop. Pierce point jag. Brass components Shooter’s Choice FP-10. Cotton patches. All purpose brush. No nonsense guarantee. Otis is standard issue of the US military. www.P65warnings.ca.gov. otistec.com. (hashtag)AmericanGunCare. USA made.Nutrition Facts
Warnings
Warning: Cancer and reproductive harm www.P65warnings.ca.gov., Warning: Choking hazard. Keep out of reach of children. Small sharp parts.,Warning: FP-10 causes serious eye irritation. Read back panel. Warning: Contains petroleum distillates. Causes serious eye irritation. If swallowed: Do not induce vomiting. Call poison center or doctor. If you feel unwell. If in eyes: Rinse cautiously with water for several minutes. If eye or skin irritation persists: Get medical attention. Keep out of reach of children.Manufacturer
Otis Technology
6987 Laura Street Lyons Falls, NY 13368
UPC
00014895007969