Red Devil Tile Grout, Ceramic, Mosaic, White
5.5 fl oz (163 ml)
On This Page
Directions
New Installations: 1. Brush tile up and down and back and forth with a clean, wet sponge or brush. Wipe surface with dry cloth. 2. Clip off trip of spout at a 45 inch angle to desired size. 3. Apply Pre-Mixed Tile Grout to each joint and work in thoroughly with a sponge or brush. 4. After grout has set (about 15 minutes) remove excess with damp sponge or cloth. 5. After about 1 hour, polish with clean, dry cloth. 6. Let cure for 48 hours before using shower. Longer cure time is required when high humidity is present. Wait 48 hours before applying grout sealer. Existing Installations: 1. Remove about 1/16 inch of of grout with grout rake or chisel. 2. Scrub surface thoroughly with kitchen cleanser. 3. Proceed as outlined above. VOC: Less than 1.5%/wt, less than 40 g/L (less water and exempt compounds).
Product Details
Ready to use. For ceramic and mosaic. Use on walls and floors. Stain and water resistant. Red Devil Pre-Mixed Tile Grout is a white grout formulated for use on ceramic and mosaic tile. Stain and water resistant. Not to be used as tub caulk. www.reddevil.com. Made in USA.Nutrition Facts
Warnings
Warning - Caner and reproductive harm - www.P65Warnings.ca.gov.,Caution: Keep out of reach of children. Not for internal consumption.Manufacturer
Red Devil, Inc.
Pryor, OK 74361
UPC
00075339004258