Berryman Engine Tune-Up, Total
16 fl oz (473 ml)
On This Page
Directions
To Use - Add 16 fl. oz. to treat 16 to 30 gallons of gasoline for faster starting, smoother idle, improved responsiveness, and better fuel economy. Use 1 fl. oz. per gallon every 3,000 5,000 miles for optimal performance. To Use - Add 16 fl. oz. to 16 to 30 gallons of diesel fuel for smoother quieter operation, improved responsiveness, and better fuel economy. Use 1 fl. oz. per gallon every 3,000 to 5,000 miles for optimal performance. For rapid fuel injector purging, fill fuel filter housing and run engine for at least 15 minutes. For best results, perform purge while fairly low on fuel. To Use - Add 8 fl. oz. to treat 4 to 6 quarts of engine oil for smoother idle and better circulation. Use 1-1/2 to 2 fl oz. per quart of engine oil capacity between oil changes for optimal performance. To flush engine, add 16 fl oz. to oil and run engine for 10 to 15 minutes. Allow to cool for safe handling and change oil and filter. Recycle used oil. Do not overfill.
Product Details
Since 1918. Dissolves carbon. Gas. Ethanol. Diesel. Oil. 1-Tank cleanup of all fuel injector types including gas, GDI & common rail diesel. Cleans carburetors and intake valves. Provides upper cylinder lubrication. Improves fuel economy. Controls moisture in fuel & oil. Restores lubricity in all diesel fuels. Stabilizes gas, diesel & biodiesel fuels. Disperses sludge & quiets noisy lifters. Maximizes fuel pump and injector life. For all 2-stroke & 4-stroke engines. Safe on catalytic converters, oxygen sensors & diesel DEF/SCR systems. Safe in gasoline, ethanol, diesel fuel & crankcase effective on GDI & common rail injector deposits automotive, marine, recreational, farm, fleet, small engines. Berryman Total Engine Tune Up has been professionally formulated for ALL 2-stroke and 4 stroke gas and desel engines, including turbos. Provides 1-tank cleanup of ALL fuel injector types. Improves fuel economy. Provides upper cylinder and diesel fuel lubricity. Improves hard starting, rough idle, and hesitation. Lowers operating cost for fewer repais. Sate on catalytic converters, O2 sensors, and diesel DEF & selective catalytic reduction (SCR) systems. EPA-registered. In The Gas Tank - Cleans ALL gas fuel injectors, including direct injection (GDI). Clean carburetors and intake vales. Controls carbon deposits in combustion chamber. Provides upper cylinder lubrication. Controls moisture. Reduces knock/ping. Restores lost power and performance. Stabilizes gas for 6 to 12 months. Lowers emissions. Effective in ALL pump gas containing up to 15% ethanol, including E10 and E15. Safe on catalytic converters and O2 sensors. In The Diesel Fuel Tank - Cleans ALL conventional and high-pressure common rail fuel injectors. Restores lubricity in ALL low-sulfur diesel and biodiesel fuels, including LSD and ULSD. Maximizes fuel pump and fuel injector life. Prevents fuel gelling, de-ices frozen fuels, and helps control moisture. Provides upper cylinder lubrication. Restores lost power and performance. Stabilizes fuel for 6 to 12 months. Reduces smoke and lowers emissions. Effective all diesel and blended biodiesel fuels up to B20. Safe on ALL exhaust system components, including DEF/SCR systems. The sulfur content of this diesel fuel additive does exceed 15 ppm. In The Crankcase - Frees sticky lifters & stuck rings for quieter operation and better compression. Cleans sludge, disperses carbon, and controls blow-by contaminants. Restores depleted lubricity additives for better start-up protection and reduced friction. Controls moisture for enhanced corrosion resistance. Restores lost power and performance. Effective in ALL 2-stroke and 4-stroke conventional and synthetic engine oils. Safe on all PCV and EGR components. In Carburetor & Vacuum Lines – Cleans intake valves and combustion chambers. With engine running. Slowly add 5 to 8 fl oz. to carburetor, throttle body, or manifold vacuum induction line such as PCV valve or brake booster. If using a vacuum line, confirm it feeds all cylinders. After application, shut off engine and allow to rest for 15 to 30 minutes. Restart and run engine to complete cleaning process. Exhaust smoke may be excessive temporarily. In Injector Cleaning Machines & Canisters – Cleans all types of fuel injectors. Mix with gasoline or diesel fuel as appropriate using a 50/50 ratio and follow the instructions of the equipment manufacturer. In Small Engines (2-Stroke & 4-Stroke) – For routine maintenance cleaning of carburetors, fuel injectors, and intake valves, for fuel storage of 6 to 12 months, and for moisture control, use 1 fl oz. per gallon in every tank of gasoline or diesel fuel. For deep cleaning of severe deposits, fuel storage up to 24 months, and moisture removal, use 2 fl oz. per gallon. For small engine tune-up and rapid deposit clean-up, slowly pour 1 to 2 fl oz. into carburetor or air-intake system with engine running. Then shut off engine and allow to rest for 5 to 10 minutes. Restart and run engine to complete cleaning process. Exhaust smoke may be excessive temporarily. Does not replace 2-cycle oil additives. www.BerrymanProducts.com. SmartLabel: Scan for more information. Please recycle. Made in USA.Nutrition Facts
Warnings
First Aid - Ingestion: If swallowed, give 1 to 2 glasses of milk or water and call physician, hospital emergency room or poison control center immediately. Do not induce vomiting unless otherwise instructed. Eye and Skin: Flush immediately with plenty of water for at least 15 minutes. If irritation persists, call physician at once. Inhalation: If overexposed, remove to fresh air. If breathing is difficult, call physician immediately. Keep out of the reach of children. Emergency response number: Infotrac 1-800-535-5053.,Danger: Flammable. Harmful or fatal if swallowed. Eye and skin irritant. Read carefully all warnings on rear panel. Danger: Contains petroleum distillates (64742-49-0), petroleum oil (64741-54-7 and/or 64742-65-0), and 2-propanol (67-63-0) and/or n-propanol (71-23-8). Do not take internally. Use in a well ventilated area, preferably outdoors. Harmful if absorbed through the skin. Avoid prolonged or repeated breathing of vapors and contact with skin and eyes. Keep away from heat, sparks, and open flame. Do not store in open or unlabeled containers. Do not store at temperatures above 120 degrees F (49 degrees C).Manufacturer
Berryman Products, Inc.
3800 E Randol Mill Road Arlington, TX 76011
UPC
00075894003161