Command Replacement Strips, Large
8 strips
On This Page
Directions
Prep: Follow product's weight holding capacity. Do not hang frames on hooks. Wait 7 days after painting before use. Wipe wall with rubbing alcohol. Do not use household cleanser or water. Apply: 1. Remove red liner. Press adhesive to hook. 2. Remove black liner. Press hook to wall for 10 seconds. Complete steps 3-5. Critical Steps to Ensure Hold: 3. Temporarily remove hook from wall to reinforce strip. Slide hookup and off base. 4. Press base firmly for 30 seconds. 5. Slide hook back on. Wait 1 hour for adhesive to build. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull away from wall. Stretch the strip slowly against the wall at least 15 inches (38 cm) to release.
Product Details
Holds up to* 5 lb | 2.2 kg. Includes 8 strips. * Follow product's weight holding capacity. Damage-free hanging. Holds strongly. Removes cleanly. Indoor product compatible. Limited Warranty/Limitation of Liability (USA and Canada): Product will be free from manufacturing defects. If defective, 3M will replace or refund at 3M's option. 3M will not be liable for any loss or damage, whether direct, indirect, incidental or consequential. command.com/howtouse. how2recycle.info. See installation video at command.com/howtouse. 1-800-934-7355. Made in USA with globally sourced materials.Nutrition Facts
Warnings
Caution: Failure to follow instructions may result in damage or injury. Do not hang valuable items. Do not hang over beds or on wallpaper. Use indoors 50 degrees to 105 degrees F (10 degrees to 40 degrees C).Manufacturer
3M
St. Paul, MN 55144
UPC
00076308408770