Command Curtain Rod Hooks
1 package
On This Page
Directions
Use with rod diameters 0.5 to 0.7 inches (1.27 cm to 1.9 cm). See back. 1. Prep: Do not hang frames on hooks. Wait 7 days after painting before use. Clean surface with rubbing alcohol. Do not use household cleansers or water. Use with rod 0.5 to 0.75 inches (1.27 cm to 1.9 cm) in diameter, length less than 48 inches (121 cm), and finial greater than 0.875 inches (2.2 cm). Ensure hooks are installed level. In use, slide curtain across. Do not pull down. 2. Apply: 1. Separate strips. Remove red liners. Press two strips to the mounting base. 2. Remove black liners. Press hook to wall for 10 seconds. Complete steps 3-5. Critical Steps to Ensure Hold: 3. Temporarily remove hook from wall to reinforce strips. Side hook up and off base. 4. Press base firmly for 30 seconds. 5. Slide hook back on. Wait 1 hour for adhesive to build. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull away from wall. Stretch each strip slowly against the wall at least 15 inches (38 cm) to release. Hooks can be reused with Command large refill strips.
Product Details
10 lb | 4.5 kg. New! Damage-free hanging. Limited Warranty/Limitation of Liability (USA and Canada): Product will be free from manufacturing defects. If defective, 3M will replace or refund at 3M's option. 3M will not be liable for any loss or damage, whether direct, indirect, incidental or consequential. command.com/howtouse. 1-800-934-7355. Hooks made in Mexico. Strips made in USA.Nutrition Facts
Warnings
Caution: Failure to follow instructions may result in damage or injury. Keep children away from curtains. Do not hang over beds or on wallpaper. Use indoors 50 degrees to 105 degrees F (10 degrees to 40 degrees C).Manufacturer
3M
St. Paul, MN 55144
UPC
00076308409128