Command Bath Mirror, Satin Nickel
1 set
On This Page
Directions
Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Press two strips together until they click. 3. Remove one side of liners. Place each pair of strips as shown. Press firmly. 4. Remove remaining liners and press mirror on wall. Press each strip firmly for 30 sec. Remove: 1. Grab bottom edge and remove mirror as shown. 2. Never pull the strip towards you. 3. Lightly press top of strip and grab tab. Stretch slowly across the wall. 4. Continue stretching slowly against the wall at least 12 inches to release. Mirror can be reused with Command Medium Picture Hanging Strips.
Product Details
Cont. 1 Mirror, 2 M/M Pairs. Damage-free hanging. Holds strongly. Removes cleanly. Proven to hold better than suction cups. Rust resistant. Water resistant strips. Limited Warranty/Limitation of Liability (USA) Product is free from manufacturing defects. If defective, 3M, will replace or refund at 3M’s option 3M is not liable for any loss or damage, whether direct, indirect, incidental or consequential. command.com. command.com/howtouse. how2recycle.info. Mirror made in China. Strips made in USA.Nutrition Facts
Warnings
Failure to follow instructions carefully may cause damage. Save instructions or visit command.com. Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15 degrees - 125 degrees F.Manufacturer
3M
St. Paul, MN 55144
UPC
00076308728571