Command Spray Bottle Hanger
1 package
On This Page
Directions
Apply: 1 Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove red liners. Press adhesive to hanger. 3. Remove black liners. Press firmly to surface for 30 seconds. 4. Wait 1 hour. Hang bottle by trigger. Remove: 1. Hold hanger gently in place. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch each strip slowly against the surface at least 15 inches to release.
Product Details
Holds 2.5 lb (1.1 kg). New! Damage-free hanging. Holds strongly. Removes cleanly. Up to 32 fl oz. General purpose. Designed to hang spray bottles up to 32 fl oz. Limited Warranty and Limitation of Liability [for product sold in USA]: This product will be free from manufacturing defects, If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential command.com. 1-800-934-7355. Hanger made in China. Strips made in U.S.A.Nutrition Facts
Warnings
Failure to follow instructions carefully may cause damage. Save instructions or visit command.com. Caution: Do not hang over beds or on wallpaper, or where bottle contents may damage surface below or cause injury. Use indoors 50 degrees - 105 degrees F.Manufacturer
3M
St. Paul, MN 55144
UPC
00076308913953