Swan XFlex Hose, Impossibly Kink Resistant, Lightweight
1 package
On This Page
Directions
Proper Hose Set Up: To ensure maximum flexibility, set up should be performed in temperatures above 70 degrees. Remove all packaging and ties. Check that the washer is properly seated in the coupling that attaches to the home/spigot. First Unwinding: 1. Take hose out of box and attach to the spigot. 2. Uncoil the hose and extend the entire length of the hose out straight. 3. Attach hose nozzle. 4. Turn on water and fill hose completely. Tip: If XFlex does get a slight kink, give the hose a gentle tug and the kink will disappear. If the hose develops kinks, it is likely twisted. Untwist the hose until it no longer twists/kinks during use. Note: If hose repair is needed, use a 1/2 inch repair coupling. Care for Your Hose: Disconnect and reconnect the hose from any standard metal faucet/hose bib and/ or metal hose attachment a minimum of 2 times per year to maintain a proper seal of the washer. Loosen any possible corrosion evident caused by weather or environmental elements which can cause the hose to fuse to the faucet or attachment. Always inspect the washer for proper placement and clear any build up on the faucet, coupling or washer. This will help prevent potential leaks. Instructions: Drain your hose when you are not using it. Water left in a hose for extended periods of time may results the formation of bacteria. Store this hose indoors when not in use.
Product Details
25 ft. (1/2 in) 7.6 m x 1.3 m. 300 PSI. Light weight & durable. Compact, lightweight. Continuous flow filament eliminates kinks - keeps water flowing. Stores flat! Ergonomic grip. Easy attachment to your spigot. Basic watering & cleanup. XFlex continuous flow. Filament. Eliminate kinks - keeps water flowing - even when folded in half! 360 degrees female fitting spins. Ergonomic female grip for easy attachment. Aluminum couplings crush at 1200 PSI. XFlex continuous Flow filament eliminates kinks. Hose stores flat and expands under pressure. The latest in flexible, compact, lightweight hoses. 50 percent lighter than traditional hoses. Flexible at all temperatures. 7 year warranty. Swan Warranty Statement: Swan Products, LLC warrants this hose against defects in workmanship or materials under normal use for the “warranty period.” if a defect arises and a valid claim is received within the warranty period, Swan Products, LLC will exchange the defective product for a new one of equal or better quality. Implied warranties including that of merchantability and fitness for a particular purpose are expressly limited in duration to the duration of this warranty. Swan Products, LLC disclaims any liability for special, incidental or consequential damages. Some states/provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province. www.swanhose.com. Customer Service: 1-800-848-8707; 1201 Delaware Ave., Marion, OH 43302; swan.cs(at)swanhose.com; www.swanhose.com. Made in America with global components.Nutrition Facts
Warnings
Warnings: Do not leave the hose under pressure when it is not in use. Heat or pressure may damage your hose, and could cause it to leak or burst. Do not leave out in freezing temperatures. Store indoors in the winter. Do not run liquids other than water through your hose as they are only designed for use with water. Not intended for indoor use.Manufacturer
Swan
UPC
00078627043731