Smart Living Holiday 100 Clear Mini Lights


 

Directions

Save these instructions: Use and care instructions: a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water. b) If the product is placed on a tree, the tree should be well secured and stable. c) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. d) When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. e) When not in use, store neatly in a cool, dry location protected from sunlight. User servicing instructions: To replace burned-out bulbs, follow directions below: 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2. Pull lamp and plastic base straight out of lampholder. 3. Remove base of burned out bulb by straightening, wires and gently pulling bulb out. 4. If your replacement bulb must be removed from its base, follow step 3. 5. Thread wires of replacement bulb through holes in old base with one wire in each hole. 6. After bulb is fully inserted into base, bend wires up, one on each side, like other bulbs in your set so that the wires will touch the contacts inside the sockets. Replace lamp with only 2.5 Volt super bright type lamp (provided with product). Important! If the set does not light, gently push each bulb firmly into the socket--they sometimes become loose in transit. Safety plug with replaceable fuses: a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. b) Slide open fuse access cover on top of attachment plug towards blades. c) Remove fuse carefully. d) Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product). e) Slide closed the fuse access cover on top of attachment plug or push cover closed so that all tabs latch. f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. Look inside for complete lighting instructions and cautions. For indoor/outdoor use 120 V 60 Hz AC.

 

Description

Holiday Smart Living. 100 Clear mini lights. String-to-string for indoor and outdoor use. Bulbs remain lit if one burns out. Plug at both ends to string sets together. Steady burning or flashing. Spare bulbs included. Total length: approx. 22.5 Ft. 1 Set.

Other Description

Special features: Factory pre-tested and guaranteed to light. Bulbs remain lighted if one burns out. Replaceable safety fused plug for your protection. Connector plugs at both ends. Steady burning or 2-way flashing. Quality guaranteed or your money back.

Warnings

Important safety instructions.
Read and follow all safety instructions.
When using electrical products, basic precautions should always be followed including the following:
a) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a ground fault circuit interrupting (GFCI) outlet. If one is not provided contact a qualified, electrician for proper installation.
b) This seasonal use product is not intended for permanent installation or use.
c) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
e) Do not let lamps rest on the supply cord or on any wire.
f) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
g) This is an electric product- not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
h) Do not use this product for other than its intended use.
i) Do not hang omaments or other objects from cord, wire, or light string.
j) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
k) Do not cover the product with cloth, paper or any material not part of the product when in use.
l) This product is equipped with push-in type lamps. Do not twist lamps.
m) This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.
n) Read and follow all instructions that are on the product or provided with the product.
Caution!!
This lighting string is rated 40.8 Watts (0.34 Amps), do not overload.
Connect other lighting strings or decorative outfits end-to-end up to a maximum of 210 Watts (1.75 Amps) total.
Maximum number of this exact light set that can be connected is five (5).
Caution:
To reduce the risk of fire do not deliberately reposition either contact.
For temporary (90 days max) installation and use only.
To reduce the likelihood of excessive heat and possible damage, use only decorative lamp accessories packaged with this product.
Always unplug this product before installing or replacing fuses.
Always unplug this product before installing or replacing lamps.
To reduce the risk of fire and electric shock: Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
To reduce the risk of fire and electrical shock: Do not mount or support strings in a manner that can cut or damage wire insulation.
To reduce the risk of overheating, replace burned-out lamp promptly.
Use 2.5 Volt super bright lamps only.
Warning!
To reduce the risk of fire or electric shock securely fasten the latches of the fuseholder. Close the fuseholder completely before plugging in the lighting string or decorative outfit.
After replacing the fuse, be sure the cord is flat in the cover channel before closing and latching the fuseholder.

Distributor

American Sales Co.
4201 WALDEN AVE., LANCASTER, NY 14086

UPC

00041520891013