ACE End Outlet Tee & Tailpiece
1 set
On This Page
Directions
The End Outlet Tee and Tailpiece is for installation in a double bowl sink drain system where the outlet drains is aligned directly under one of the sinks. Installation Hints: The End Outlet Tee may be installed directly to the threads of the strainer by using the extra nut and insert provided (Fig. 2) or by a slip joint connection attaching the tee to the tailpiece, which is assembled to the strainer (Fig. 1). Match your existing installation. To replace a complete end outlet waste drain installation purchase the 16 inch End Outlet Style with Sanitary Baffle (Ace no. 43781). Tools Needed: Pipe or spud wrench (to remove old brass drain). Instructions: Slip Joint Connection: Note: Discard extra nut and short tailpiece insert. 1. Turn off water at the tap. 2. Remove old end outlet tee and tailpiece. 3. Remove top nut A and washer B on new tee. 4. Place nut A and ply washer on sink tailpiece as illustrated. 5. Remove side nut C and washer D and place on waste drain tube. 6. Place nut and washer from J Bend onto tee. 7. Position tee. Hand-tighten nuts. Run water to check for leaks. Instructions: Direct Connection: 1. Turn off water at the top. 2. Remove old end outlet tee and tailpiece. 3. Remove top nut A and washer B. 4. Invert nut A and drop insert into it. 5. Attach strainer using rubber washer. 6. Put second nut E and ply washer F on insert. 7. Put side nut C and washer D on wast drain tube. 8. Place nut and washer from J Bend onto tee. 9. Position tee. Hand-tighten nuts. Run water to check for leaks. Note: These parts are designed for a hand-tight installation. Pipe thread compound is not required.
Product Details
1-1/2 in. Quality since 1924. Slip joint or direct connection. For double bowl sink. Compatible with brass plumbing. Ace Promise: Satisfaction guaranteed. www.acehardware.com. Made in the USA. Manufactured in USA.Nutrition Facts
Manufacturer
ACE HARDWARE
Oak Brook, IL 60523 USA
UPC
00082901482789