Eight Ball Helmet, Multi-Sport, Ages 14+
1 helmet
On This Page
Directions
Instructions for Use: Sizing and fitting: The helmet can only protect if it fits well. Therefore, the buyer should try different sizes and choose the size which feels secure and comfortable on the head. Put the helmet on your head. It should fir comfortably snug at the top and sides, not too tight or too loose. The helmet should be positioned on the head so that it maintains a level fir position so as to protect the forehead and not be pushed too far over the back of the head, does not impede your field of vision, cannot be pulled off easily, and does not readily change position on your head. Buckling Up: Fasten the helmet strap until you near the buckle make a click sound. Make sure that the tension is even between the front and the back strap. If the strap is too loose or too tight, unbuckle the helmet and adjust the fit. The helmet should be adjusted to fit the user, e.g. the straps positioned so that they do not cover the ears, the buckle positioned away from the jawbone and the straps and buckle adjusted to be both comfortable and firm. It is extremely important that the helmet be buckled at all times, as this will keep the helmet on your head in the event of an accident. For use in bicycling, skateboarding, roller skating and inline skating. Care: Always check that your helmet is intact and that no parts are damaged or missing. A helmet that has deep scratches, has received a strong impact from an accident, has been exposed to extreme heat or cold or is worn out or loosened from years of use should be destroyed and replaced with a new helmet. Clean only with water and a gentle solution of soap. Do not use solvents like bleach, cleaners like ammonia adhesive stickers, petroleum - based products, transfers or paint on your helmet because these substances can severely affect the protection provided by the helmet. Pads are hand - washable and replaceable. Helmets have a limited life span - in addition to the above warning, we recommended replacing every three years. Safety: Roller sports can be hazardous and dangerous activities. Always stay in control, be aware of your surroundings and wear proper fitting safety gear.
Product Details
Ages 14+. Dual certified for bike & skate use. Fits head sizes 55 - 58 cm. Dual Certified: Complies with US CPSC bike and ASTM skate safety standards. ABS outer shell with EPS liner. Comfortable inner foam fit pads. Adjustable buckle straps. Complies with ASTM: Safety standards for skateboarding and trick roller skating. US CPSC: Safety standard. Bicycle helmets for persons ages 5 years and older. Complies with CE: Helmet for pedal cyclists, skateboarders and roller skaters. UKCA: Helmet for pedal cyclists, skateboarders and other roller skaters. All products made to the quality specification of Triple Eight Distribution, LLC. Incorrect. Correct. This helmet complies with CPSC standards for bicycle helmets for persons ages 5 and older; ASTM F - 1492 for skateboarding and trick roller skating. CE listed. Certified helmet. Complies with ASTM. US CPSC. Complies with CE. UKCA. www.triple8.com. Made in China.Nutrition Facts
Warnings
Warning! This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation / hanging if the child gets trapped with the helmet. Do not wear a helmet that has been involved in an accident, even if you cannot see any damage. The helmet can be damaged to the point that it would no longer provide adequate protection to the head against further impact. If such an impact occurs, the helmet should be returned to the manufacturer for competent inspection, or be destroyed and replaced. For maximum protection, the helmet must be fitted and attached properly to the wearers head in accordance with the manufacturers instructions. Warning! For use in non-motorized recreational sports as indicated above. This helmet should not be used by children while climbing or doing other activities when there is a risk of strangulation/hanging if the child gets trapped with the helmet. No helmet can protect against all possible impacts, serious injury or death could occur. For maximum protection, the helmet must be fitted and attached properly to the wearer's head according to Triple Eight's instructions. The helmet may, after receiving an impact, be damaged to the point that it is no longer adequate to protect the head against further impacts. This damage may not be visible to the user. If the helmet sustains a severe impact, it should be returned to the manufacturer for inspection or destroyed. Avoid collisions and be considerate of others. Do not make any modifications or remove any of the original component parts of the helmet other than as recommended by the manufacturer. The helmet should not be adapted for the purpose of fitting accessories in a way that is not recommended by the manufacturer.Manufacturer
Triple Eight Distribution, Inc.
Port Washington, NY 11050
UPC
00604352032070