Feit Electric Light Bulb, LED, Warm White, 3.5 Watts
1 bulb
On This Page
Product Details
Microwave. Non-dimmable. 40 w replacement. Uses only 3.5 w. Life: 13.7 years (Based on 3 hours per day). 15,000 hours. 270 lumens. $60 approximate energy saving (Energy savings are estimated based on the performance specifications for this LED). Warm white 3000k. 1 T8 bulb. Uses 91% less energy (91% energy usage reduction is estimated based on the rated performance specifications for this LED bulb instead of a 40 watt incandescent bulb. Energy usage reduction will depend on actual use). Lights up instantly. Mercury free. The performance specifications (Lumens, watts, life and CCT) printed on this product package should only be considered an approximation of expected performance. This bulb has a two year warranty. If it fails or you are not satisfied with its performance, contact Feit Electric at info(at)feit.com or call toll free 1-866-326-Bulb for instructions on lamp replacement. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded. Do not return the bulb to the store. UL listed. www.feit.com. Made in China.Nutrition Facts
Warnings
Caution: Use only on 120 volt 60 Hz circuits. Suitable for damp locations. Minimum starting temperature -13 degrees F (-25 degrees C). This device is not intended for use with emergency exit fixtures or emergency lights. Lamp may not be compatible with all dimmers. When installing, make sure that power is switched off before connecting or disconnecting to fixture. Do not look directly into the light. Added weight of the device may cause instability of a free-standing portable luminaire. Use only with a shade. Use in portable table lamps in which the distance from the bottom of the base to the top of the lampholder does not exceed three (3) times the minimum base diameter. For more information including dimmer compatibility visit www.feit.com or call our toll free number 1-866-326-Bulb.,This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to connect the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacture could void the user's authority to operate the equipment.Manufacturer
FEIT ELECTRIC
Pico Rivera, CA 90660
UPC
00017801692679