Permatex 5 Minute Epoxy
10 - 0.14 oz (4 g) cups [1.4 oz]
On This Page
Directions
Directions: 1. Surfaces to be bonded should be clean and dry. To ensure good adhesion, rough-up surfaces if possible. 2. Remove protective film from cup. Using one of the mixer sticks provided, push down the center of the kit to form mixer cup. Scrape all epoxy resin into the center of the cup and mix thoroughly (approximately one minute). 3. Use mixing stick to apply epoxy to bonding area. Press surfaces together until set. 4. While epoxy is still tacky, the excess can be removed with solvent. 5. Parts fixture in 5-15 minutes, full cure achieved in 24 hours.
Product Details
Fast cure. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: May cause allergic skin reaction. May cause severe eye, skin and respiratory irritation. Read carefully other cautions on back panel. Warning: May be harmful in contact with skin. Causes skin and serious eye irritation. May cause allergic skin reaction. May cause damage to organs through prolonged or repeated exposure. Precautionary Statements - Prevention: Contains bisphenol A resin, mercaptan polymer. Do not breathe vapors. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection. Contaminated work clothing should not be allowed out of the workplace. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Precautionary Statements - Storage: Store in a well-ventilated place. Keep container tightly closed. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226214256