Permatex Threadlocker, Red, High Temperature
0.20 fl oz (6 ml)
On This Page
Directions
1. Clean and dry parts using Permatex Surface Prep activator. 2. Shake Threadlocker before each use. 3. Remove cap and snip nozzle tip. 4. Apply to threaded areas and assemble parts. Refer to technical data sheet for complete information. Note: Threadlocker is for use on metal parts and is not to be used on plastics. For Red Threadlocker, cured product must be heated to 500 degrees F (260 degrees C) before parts will separate. Precautionary Statements - Storage: Protect from sunlight. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant. Keep out of the reach of children.
Product Details
Heat & special tools needed for disassembly. 3/8 in - 1.5 in (10-38mm). Temperature range to 450 degrees F (232 degrees C). Meets OEM specs. Product Name: High Temperature; Item No. Example: 24026; Color: Red; Fastener Size: 3/8 in to 1.5 in (10 to 38 mm); Torque (in. lbs. ) Break / Prevail: 200 / 225; Shear Strength: 3000 PSI; Maximum Temperature: +450 degrees F (+232 degrees C); Common Applications: Camshaft sprocket bolts, idler bearings, transmission input/output shaft threads, ring gear or shock bolts; When to Apply: Before assembly. Permatex Threadlockers fixture in approximately 20 minutes and are fully cured within 24 hours. Permatex Surface Prep activator reduces fixture time to 5 minutes. Preceding values are for 3/8 inch - 16 steel as received nuts and bolts at 72 degrees F (22 degrees C). www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Precautionary Statements - Prevention: Contains dimethyl hydroperoxide, cumene, maleic acid. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Precautionary Statements- Response If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.,Warning: Eye and skin irritant. Read carefully other cautions on back. Warning: Causes skin irritation. Causes serious eye irritation. May cause cancer. May cause damage to organs through prolonged or repeated exposure.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226240262