Permatex Threadlocker, Blue, Surface Insensitive
0.20 fl oz (6 ml)
On This Page
Directions
1. Clean and dry parts using Permatex Surface Prep activator. 2. Shake Threadlocker before each use. 3. Remove cap and snip nozzle tip. 4. Apply to threaded areas and assemble parts. Refer to technical data sheet for complete information. Note: Threadlocker is for use on metal parts and is not to be used on plastics.
Product Details
No primer needed for stainless steel & zinc. Hand tool removable, works on oily surfaces. 1/4 in. - 3/4 in. (6-20 mm). Product Name: Low Strength; Color: Purple; Fastener Size: Up to 1/4 in. (up to 6mm); Torque (in. lbs.) Break/Prevail: 55 / 20; Shear Strength: 500 psi; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Set screws, calibration screws, adjustment screws, meters and gauges; When to Apply: Before assembly. Product Name: Medium Strength; Color: Blue; Fastener Size: Up to 1/4 in. to 3/4 in. (6 mm to 20 mm); Torque (in. lbs.) Break/Prevail: 155 / 50; Shear Strength: NA; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Machine tools and presses, pumps and compressors, mounting bolts, and gear boxes; When to Apply: Before assembly. Product Name: Surface Insensitive; Color: Blue; Fastener Size: Up to 1/4 in. to 3/4 in. (6 mm to 20 mm); Torque (in. lbs.) Break/Prevail: 155 / 50; Shear Strength: NA; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Rocker studs, adjustment bolts, valve & cam cover bolts, disc brake calipers, alternator & pulley assembles; When to Apply: Before assembly. Product Name: Permanent Strength; Color: Red; Fastener Size: 3/8 in. to 1 in. (10 to 25 mm); Torque (in. lbs.) Break/Prevail: 190 / 275; Shear Strength: 2250 psi; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Cylinder block bolts, ring gear bolts, and transmission stud bolts; When to Apply: Before assembly. Product Name: High Strength; Color: Red; Fastener Size: 3/8 in. to 1 in. (10 to 25 mm); Torque (in. lbs.) Break/Prevail: 250 / 250; Shear Strength: NA; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Cylinder block and rocker arm studs, shock absorber mounts and ring gear bolts; When to Apply: Before assembly. Product Name: High Temperature; Color: Red; Fastener Size: 3/8 in. to 1.5 in. (10 to 38 mm); Torque (in. lbs.) Break/Prevail: 200 / 225; Shear Strength: 3000 psi; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Camshaft sprocket bolts, idler bearings, transmission input/.output shaft threads, ring gear or shock bolts; When to Apply: Before assembly. Product Name: Penetrating Grade; Color: Green; Fastener Size: no. 2 to 1/2 in. (2.2 to 12 mm); Torque (in. lbs.) Break/Prevail: 65 / 225; Shear Strength: 1500 psi; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Preassembled fasteners instrumentation screws, electrical connectors, carburetors; When to Apply: After assembly. Permatex threadlockers fixture in approximately 20 minutes and are fully cured within 24 hours. Permatex surface prep activator reduces fixture time to 5 minutes. Preceding values are for 3/8 in - 16 steel "as received" nuts and bolts at 72 degrees F (22 degrees C). Meets OEM specs. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Precautionary Statements - Prevention: Contains: Dimethyl hydroperoxide, Cumene, Maleic acid, Acrylic acid. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Precautionary Statements - Response: If In Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If Inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Precautionary Statements - Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. May cause cancer. May cause respiratory irritation. Keep out of the reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226240279