Permatex Threadlocker, Red, Permanent Strength
0.34 fl oz (10 ml)
On This Page
Directions
1. Clean and dry parts using Permatex Surface Prep activator. 2. Shake Threadlocker before each use. 3. Remove cap and snip nozzle tip. 4. Apply to threaded areas and assemble parts. Refer to technical data sheet for complete information. Note: Threadlocker is for use on metal parts and is not to be used on plastics. For Red Threadlocker, cured product must be heated to 500 degrees F (260 degrees C) before parts will separate. Precautionary Statements- Storage: Protect from sunlight. Keep container tightly closed. Store locked up. Precautionary Statements- Disposal: Dispose of contents/container to an approved waste disposal plant. Keep out of the reach of children.
Product Details
Heavy shock or vibration condition. 3/8 in - 1 in (10-25 mm). High strength formula for fixed assemblies. Product Name: Permanent Strength; Item No. Example: 26240; Color: Red; Fastener Size: 3/8 in to 1 in (10 to 25 mm); Torque (in. lbs. ) Break / Prevail: 190 / 275; Shear Strength: 2250 PSI; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Cylinder block bolts, ring gear bolts, and transmission stud bolts; When to Apply: Before assembly. Permatex Threadlockers fixture in approximately 20 minutes and are fully cured within 24 hours. Permatex Surface Prep activator reduces fixture time to 5 minutes. Preceding values are for 3/8 inch - 16 steel as received nuts and bolts at 72 degrees F (22 degrees C). Meets OEM specs. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains: Dimethyl hydroperoxide, Cumene. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wash face, hands and any exposed skin thoroughly after handling. Wear eye/face protection. Precautionary Statements- Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If Inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a Poison Center or doctor/physician if you feel unwell.,Warning: Eye and skin irritant. Read carefully other cautions on back. Warning: Causes skin irritation. Causes serious eye irritation. May cause cancer. May cause damage to organs through prolonged or repeated exposure.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226262103