Permatex Threadlocker, Red
1.22 oz (36 ml)
On This Page
Directions
1. Clean and dry parts using Permatex surface prep activator. 2. Shake threadlocker before each use. 3. Remove cap and snip nozzle tip. 4. Apply to threaded areas and assemble parts. For cup/core applications, apply sealant to both parts and assemble parts in accordance with standard practices. Refer to technical data sheet for complete information. Note: Threadlocker is for use on metal parts and is not to be used on plastics. For red threadlocker, cured product must be heated to 500 degrees F (260 degrees C) before parts will separate.
Product Details
Permanent strength plug sealant & retaining compound. Dual purpose. 3/8 inch - 1 inch (10-25 mm). High strength. Permatex Threadlockers: Product Name: Low Strength; Color: Purple; Fastener Size: Up to 1/4 inch (up to 66 mm); Torque (in. lbs.) Break/Prevail: 55/20; Shear Strength: 500 PSI; Maximum Strength: +300 degrees F (+149 degrees C); Common Applications: Set screws, calibration screws, adjustment screws, meters and gauges; When to Apply: Before assembly. Product Name: Medium Strength; Color: Blue; Fastener Size: 1/4 inch to 3/4 inch (6 to 20 mm); Torque (in. lbs.) Break/Prevail: 115/50; Shear Strength: NA; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Machine tools and presses, pumps and compressors, mounting bolts, and gear boxes; When to Apply: Before assembly. Product Name: Cup & Core Sealant; Color: Red; Fastener Size: 3/8 inch to 1 inch (10 to 25 mm); Torque (in. lbs.) Break/Prevail: 190/275; Shear Strength: 2250 PSI; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Cylinder block bolts, ring gear, bolts, and transmission stud bolts; When to Apply: Before assembly. Product Name: High Strength; Color: Red; Fastener Size: 3/8 inch to 1 inch (10 to 25 mm); Torque (in. lbs.) Break/Prevail: 250/250; Shear Strength: NA; Maximum Strength: +300 degrees F (+149 degrees C); Common Applications: Cylinder block and rocker arm studs, shock absorber mounts and ring gear bolts; When to Apply: Before assembly. Product Name: High temperature; Color: Red; Fastener Size: 3/8 inch to 1.5 inch (10 to 38 mm); Torque (in. lbs.) Break/Prevail: 200/225; Shear Strength: 3000 PSI; Maximum Temperature: +450 degrees F (+232 degrees C); Common Applications: Camshaft sprocket bolts, idler bearings, transmission input/output shaft threads, ring gear or shock bolts; When to Apply: Before assembly. Product Name: Large diameter; Color: Red; Fastener Size: 1 inch and larger (25 mm and larger); Torque (in. lbs.) Break/Prevail: 275/250; Shear Strength: 2500 PSI; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Frame brackets, suspension fasteners, shock absorber mounts and wheel studs; When to Apply: Before assembly. Product Name: Penetrating grade; Color: Green; Fastener Size: (hashtag)2 to 1/2 inch (2.2 to 12 mm); Torque (in. lbs.) Break/Prevail: 65/225; Shear Strength: 1500 PSI; Maximum Temperature: +300 degrees F (+149 degrees C); Common Applications: Preassembled fasteners, instrumentation screws, electrical connectors, carburetors; When to Apply: After assembly. Permatex threadlockers fixture in approximately 20 minutes and are fully cured within 24 hours. Permatex surface prep activator reduces fixture time to 5 minutes. Preceding values are for 3/8 inch - 16 steel 'as received' nuts and bolts at 72 degrees F (22 degrees C). www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains dimethyl hydroperoxide, cumene. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breath dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wash face, hand and any expose skin thoroughly after handling. Wear eye/face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If Inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison or doctor/physician if you feel unwell. Precautionary Statements - Storage: Protect from sunlight. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: Eye and skin irritant. Read carefully cautions on back. Warning: Causes skin irritation; Causes serious eye irritation; May cause cancer; May cause damage to organs through prolonged or repeated exposure. Keep out of the reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226262400