Permatex Thread Compound, Seal + Lock
1.18 fl oz (35 ml)
On This Page
Directions
Automotive Use: Freeze plugs, oil pressure sensor (switch), coolant temp, sensor, brake master cylinder line nuts, clutch master cylinder line nuts, fuel line supply nut / bolt, brake caliper line nuts, PCV valve, fuel injector, dry sump oil supply and return lines, power steering cooler lines, transmission cooler lines, threaded fittings to radiator. Hardware Use: Metal plumbing connections, sprinkler system, garden hose connectors and pipe plugs. Break Strength: 3/8 inch plain nut and bolt 50-100 in lbs; 3/8 inch zinc plated nut and bolt 80-120 in lbs. Shear Strength: 1000 PSI. Temp Range: -60 degrees F to 300 degrees F (-51 degrees C to 150 degrees C). Full Cure: 72 hours. Directions: 1. Knead tube of thread compound before use. 2. Apply sealant to leading threads of the male fitting, leaving the first thread free of sealant. Apply to only 3/4 of a thread turn; it is not necessary to apply to all threads. 3. Assemble parts and tighten to recommended torque. 4. Allow to cure 72 hours for full strength. 5. To accelerate cure time prep threads with Permatex surface prep activator. Refer to technical data sheet for complete information. Note: Permatex thread compound seals threaded metal fittings on hydraulic, pneumatic, fuel and cooling systems. It is not recommended for use on plastics or rubber. Not for use on potable water connections.
Product Details
Thread sealant & blue threadlocker in one! Seals to 1,000 PSI. 120 in. lbs. of locking force. Hand tool removable. Permatex seal & lock is a unique anaerobic formulation that combines thread sealing properties with the strength and locking capability of blue threadlocker. Seal & lock allows you to create a water and air tight seal with the reassurance that the assembly is locked in place and will not loosen. Works On: Steel, aluminum allows, brass and copper. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains: Dimethyl hydroperoxide, cumene. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Wear eye/face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If Inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Precautionary Statements - Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: May cause allergic skin reaction. Read carefully other cautions on back panel. Warning: Causes skin irritation; Causes serious eye irritation; May cause an allergic reaction; May cause cancer; May cause damage to organs through prolonged or repeated exposure. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226575357