Permatex Undercoating
16 oz (454 g)
On This Page
Directions
Directions: Tap bottom of an to loosen agitator ball. If ball does not loosen, shake can until agitator ball is heard. Shake can for at least five (5) minutes after hearing agitator ball. For best adhesion, apply only to clean, dry surfaces. Apply a uniform coating, holding can 10 to 12 inches from surface. Multiple thin coats are most effective allowing 15 to 20 minutes between coats (shake well before reapplying). Allow to dry for 24 hours.
Product Details
Seals, protects against rust. Permatex Undercoating is a special blend of coating materials design to offer maximum protection, coverage and durability. This formula permits effective coating thickness buildup for maximum protection against corrosion and superior insulation against road and chassis noise. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains: Water, Propane, Asphalt (petroleum), Toluene, mineral spirits, acetone, butane, calcium carbonate, kaolin, magnesium silicate. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Do not breathe dust/fume/gas/mist/vapors/spray. Do not eat drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Keep away from heat, sparks, open flames and hot surfaces – No smoking. Do not spray on an open flames or other ignition source. Pressurized container: Do not pierce or burn, even after use. Pressurized container: may burst if heated. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing if eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin iritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. If in Inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a Poison Center or doctor/physician it you feel unwell. If Swallowed: Immediately call a Poison Center or doctor/physician. Do not induce vomiting. Precautionary Statements - Storage: Store locked up. Protect from sunlight and do not expose to temperatures exceeding 120 degrees F/49 degrees C. Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Danger: Extremely flammable contents under pressure. Harmful if swallowed or inhaled. Skin and eye irritant. Read carefully other cautions on back panel. Important: Avoid application of any under - coating or rust proofing materials closer than 12 inches to any part of exhaust system or catalytic converter. Never spray directly onto exhaust system or catalytic converter. For cleanup, use mineral spirits or kerosene. This product is not considered paintable. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes skin irritation. May cause genetic defects. Suspected of damaging fertility or the unborn child. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure. May be fatal if swallowed and enters airways. Keep out of the reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226800725