Permatex Adhesive Sealant, Clear, Silicone RTV
11 oz (311 g)
On This Page
Directions
Directions: 1. Surfaces should be clean and dry. Cut off tip of cartridge. 2. Attach nozzle, cut at 45 degree angle at desired point and cartridge into a caulking gun. 3. Apply to desired surface and assemble parts immediately while silicone is still wet. Bonded surfaces may require clamping. 4. Silicone skins and becomes tack free in one hour. Allow 24 hours for full cure under normal conditions; longer in cold or dry conditions. 5. To reuse package, leave 1/2 inches length of material extended from nozzle; cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before.
Product Details
General purpose adhesive. Not for engine use. An all-purpose Clear silicone adhesive sealant that provides waterproof, protective seal around metal, glass, rubber, etc. Not for automative engine use. www.permatex.com. Assembled in U.S.A with U.S. and global materials.Nutrition Facts
Warnings
Caution: On direct contact, uncured sealant irritates eyes and skin. Read carefully other cautions on back panel.,Warning: Contains: Petroleum distillates, Amorphous silica. Precautionary Statements - Storage: Keep container tightly closed. Store in a well-ventilated place Precautionary Statements - Disposal: Disposal should be made in accordance with federal, state and local regulations.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226808554