Permatex Gasket Maker, Automatic Transmission
3 oz (85 g)
On This Page
Directions
Directions: 1. For best results, surfaces should be clean, dry and residue free. 2. Cut nozzle to desired bead size and apply a continuous 1/16 inch to 1/4 inch (2 to 6 mm) bead of silicone to one surface; surrounding all bolt holes. 3. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids and returning to service (allow more time to cure in cold or very dry conditions). 5. Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline. Store below 80 degrees F (27 degrees C).
Product Details
For automatic transmission pans, covers & case halves. Resists conventional & synthetic ATFs. Permatex automatic transmission gasket maker is specially formulated to ensure complete sealing when in contact with conventional and synthetic automatic transmission fluids. This specialty silicone can be used as a gasket maker or as a cut gasket sealant. Meets the OEM specs. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains: 2-butanone oxime, carbon black, limestone. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use personal protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/ face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Precautionary Statements - Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: On direct contact, uncured sealant irritates eyes and skin. Read carefully other cautions on back panel. Warnings: Causes serious eye irritation; May cause allergic skin reactions; Suspected of causing cancer. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226811806