Permatex Gasket Maker, Gear Oil
3 oz (85 g)
On This Page
Directions
Directions: 1. For best results, surfaces should be clean, dry and residue free. 2. Cut nozzle to desired bead size and apply a continuous 1/16 inch to 1/4 inch (2 to 6 mm) bead of silicone to one surface; surrounding all bolt holes. 3. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids and returning to service (allow more time to cure in cold or very dry conditions). 5. Replace cap after each use. Note: Not recommended for use on head gaskets or parts in contact with gasoline. Store below 80 degrees F (27 degrees C).
Product Details
Specialized formula. For differentials & transfer cases. Resists friction modifiers. Permatex gear oil gasket maker is specially formulated to withstand the friction modifiers in conventional and synthetic gear oils that breakdown normal RTVs and cause leaks. This specialty silicone has been tested to OEM specifications to ensure complete sealing of differentials and transfer cases. Can be used as a gasket maker or a cut gasket sealant. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Precautionary Statements - Prevention: Contains: 2-butanone oxime, stearic acid, calcium carbonate. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Use personal protective equipment as required. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Precautionary Statements - Storage: Protect from sunlight. Store in a well-ventilated place. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: On direct contact, uncured sealant irritates eyes and skin. Read carefully other cautions on back panel. Warning: May cause allergic skin reactions; Suspected on causing cancer. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226811820