Permatex Ultra Black Gasket Maker, Oil Resistant
8.75 oz (248 g)
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. 2. Screw nozzle into place and push to dispense, applying a continuous 1/16 inch to 1/4 inch (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline. Precautionary Statements - Storage: Protect from sunlight. Store in a well-ventilated place. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waster disposal plant.
Product Details
High flexibility & oil resistance. Ideal for domestic & older vehicles. Sensor safe RTV silicone. Meets OEM specs. Ultra Black Gasket Maker retains high flexibility while remaining resistant to oils and common shop fluids. www.permatex.com. Toll Free: 866-732-9502. Assembled in USA with US and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains 2-butanone oxime, calcium carbonate, carbon black. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Use personal protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/ eye protection/ face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.,Warnings: Contents under pressure. Do not remove rubber plug on direct contact, uncured sealant irritates eyes. Read carefully other cautions on back panel. Warning: Causes serious eye irritation. May cause allergic skin reaction. Suspected of causing cancer. Contains gas under pressure; may explode if heated. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226820808