Permatex Gasket Maker, High Torque, Ultra Grey
13 oz (368 g)
On This Page
Directions
Directions: 1. Surfaces should be clean and dry. Cut off tip of cartridge. 2. Attach nozzle cut at 45 degree angle at desired point and insert cartridge into a caulking gun. 3. apply a continuous 1/16 in to 1/4 in (2 to 6 mm) bead to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 4. Let dry for one hour then tighten to torque specifications. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. To reuse package, leave 1/2 in length of material extended from nozzle; cured material will form a protective plug. To reuse, carefully remove the plug and dispense as before. Note: Not recommended for use on head gaskets or parts in contact with gasoline.
Product Details
Rigid torque & high vibration application. Ideal for import & newer vehicles. Sensor safe. Ultra grey gasket maker is a premium choice for rigid joints that experience high torque loads. Meets OEM specs. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65warnings.ca.gov.,Precautionary Statements - Prevention: Contains 2-butanone oxime, calcium carbonate, stearic acid. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/gas/mist/vapors/spray. Use personal protective equipment as required. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of workplace. Wear protective gloves/protective clothing/eye protection/face protection. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. wash contaminated clothing before reuse. Precautionary Statements - Storage: Protect from sunlight. Store in a well-ventilated place. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: On direct contact, uncured sealant irritates eyes and skin. Read carefully other cautions on back panel. Warning: Causes serious eye irritation; May cause allergic skin reaction; Suspected of causing cancer. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226821959