Permatex Epoxy, 5 Minute, Hardener/Resin
2 - 0.6 oz (17 g) tubes [1.2 oz (24 g)]
On This Page
Directions
Directions: For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired. 2. Remove tube caps. Pierce end of tubes with the back of cap. 3. Squeeze equal amounts of resin and hardener onto a discardable surface. Squeeze with equal pressure from bottom of tubes so diameter of bead is uniform. 4. Mix thoroughly until every colored. 5. Apply to surfaces to be joined or repaired. Epoxy starts to set in 5 minutes and reaches usable strength in 4 hours. When storing, clean caps and tube threads. Replace caps to original tube (color coded), or hardening may occur in tube zones. Note: Not recommended for use on polyethylene or polypropylene plastics. This epoxy product is recommended for indoor use only. As the cured epoxy can yellow and darken when exposed to sunlight and the elements. Temperature Range: -60 degrees F to 180 degrees F (-51 degrees C to 82 degrees C).
Product Details
One hardener/one resin. 5 min. set time. 10 min. cure time. Up to 3400 PSI strength. Dries clear. General purpose. Bonds: Metals, hard plastics, ceramics, glass, rubber & more. A two-part, rapid curing, clear, general purpose epoxy. May be used as a metal filler and to restore rotten wood. Resists water, gasoline, diesel, kerosene and most other chemicals. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Precaution Statements - Prevention: Contains: Bis [4-(2,3-epoxypropoxy) phenyl] propane, 2,4,6-Tris (dimethylaminomethyl)phenol. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection. Contaminated work clothing should not be allowed out of the workplace. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Call a poison center or doctor/physician if you feel unwell. If Swallowed: Call a poison center or doctor/physician if you feel unwell. Rinse mouth. Precautionary Statements - Storage: Protect from sunlight. Store in a well-ventilated place. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Warning: May cause allergic reaction. May cause eye and skin irritation. Read carefully other cautions on back panel. Warning: Harmful if swallowed or in contact with skin; Causes skin irritation; Causes serious eye irritation; May cause an allergic skin reaction. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226842015