Permatex Steel Weld
2 oz (56 g)
On This Page
Directions
Directions: 1. To achieve optimum adhesion, roughen and clean the surfaces to be repaired. 2. Wearing gloves twist or cut off required amount. 3. Mix by kneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above. 4. Apply to the repair surface within 2 minutes of mixing, forcing into any cracks or holes to be filled. Remove excess material with a tool moistened with clean water before hardening begins. Note: When applying to a damp, wet area, work the mixed epoxy into the surface and apply pressure until adhesion begins to take effect. Steel Weld epoxy has a working time of 5 minutes, fixture time of 1 hour, and will fully cure in 24 hours. Temp Range: -40 degrees to 250 degrees F (continuous), -40 degrees to 300 degrees F (intermittent).
Product Details
5 min. set time. 1 hour cure time. Up to 900 PSI strength. Dries metallic grey. Drinking water safe, steel reinforced. Bonds: Aluminum, steel, stainless steel, iron, copper, bronze, brass & other metals. Facility: No. 1 USA. Permatex Steel Weld is fast-setting, steel-reinforced epoxy putty that can be used to repair, form or rebuild steel and many other metals. Non-rusting, non-shrinking, and non-flammable formulation. Safe for repairs that come in contact with drinking water. Once cured, repair can be drilled, tapped, machined, filed and painted. NSF: Certified to NSF/ANSI Std. 61. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer - www.P65Warnings.ca.gov.,Warning: Causes skin irritation and serious eye irritation. May cause an allergic skin reaction. May cause cancer. Precautionary Statements - Prevention: Contains: Magnesium silicate, bisphenol A-epichlorhydrin resin, glass oxide, quartz silica. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Wear protective gloves/protective clothing/eye protection/face protection. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Precautionary Statements - Response: If In Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If Eye Irritation Persists: Get medical advice/attention. If On Skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Precautionary Statements - Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant. Keep out of the reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226843326