Permatex Rubber Gasket Sealant & Dressing
1 oz (28 g)
On This Page
Directions
Directions: 1. Flange surfaces should be clean, dry and completely free of paint, dirt, grease or old gasket material. 2. Pierce top of tube with back of cap and apply a thin even coat of rubber gasket sealant & dressing to all sides of gasket. Allow to air dry until it becomes somewhat 'tacky'. 3. Align gasket, press into place and assemble. 4. Tighten to torque specifications.
Product Details
Conditions rubber. Non-hardening, soft setting. Superior oil, fuel, & fluid resistance. Permatex rubber gasket sealant & dressing is designed to complement the installation of cut or molded rubber gaskets. Flexible and non-hardening, it holds gaskets in place for easy, exact placement and is forgiving enough to allow repositioning during assembly. www.permatex.com. Toll Free: 866-732-9502. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.,Precautionary Statements - Prevention: Contains: Talc, rosin, 2-propanol, ethanol, titanium dioxide, carbon black. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breath dust/fume/gas/mist/vapors spray. Wear eye/face protection. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protection gloves. Keep away from heat/sparks/open flames/hot surfaces - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use non-sparking tools. Take precautionary measures against static discharge. Precautionary Statements - Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If on Skin (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water. If skin irritation occurs: Get medical advice/attention. If Swallowed: Immediately call a Poison Center or doctor/physician. Rinse mouth. In Case of Fire: Use CO2, dry chemical, or foam to extinguish. Precautionary Statements - Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Precautionary Statements - Disposal: Dispose of contents/container to an approved waste disposal plant.,Danger: Extremely flammable. May cause eye and respiratory irritation. Vapor harmful. Read carefully other cautions on back panel. Danger: Fatal if swallowed; May cause an allergic skin reaction; May cause cancer; Flammable liquid and vapor. Keep out of reach of children.Manufacturer
Illinois Tool Works Inc.
Solon, OH 44139
UPC
00686226854094