Metabo HPT Finish Nailer
1 nailer
On This Page
Directions
Switch mechanism for nailing action. Contact actuation mechanism down. Up. Single sequential actuation mechanism of this Nailer. (1) Press the push lever against the desired surface, and pull the trigger rapidly and firmly. (2) The nailer is designed so that after firing a nail, the trigger must be released and then pulled again before the next nail can be fired.
Product Details
Air pressure 70-120psi. Nail length X diameter. 1-1/4 Inches X 15 Ga. 2-1/2 Inches X 15 Gauge. Made in Taiwan.Nutrition Facts
Warnings
Danger: Risk of injury to pressure. Read and understand tool labels and instructions manual before use. Failure to follow warnings could result in death or serious injury. Operators and others in work area must wear eye protection safety glasses with side shields. Wear ear protection. Do not place finger on trigger and keep fingers away from trigger when not driving fasteners to avoid accidental discharge. Know and understand what trigger system you are using. Check manual for triggering options. Do not make contact with safety tip (push level) when not driving fasteners. Disconnect load from air source before making adjustments, loading or unloading, clearing jams or learning work area. Never point tool at yourself or others in work area. Never use oxygen or other bottled gases. Explosion may occur. Be sure to keep fingers off trigger when blow nozzle getting use. A nail will fire each time the trigger is depressed as long as the push lever remains depressed.Manufacturer
Koki Holdings
UPC
00717709024151D