Seal-Up Repair Sealant, Liquid Glass Metallic, The Original
22.8 oz (646 g)
On This Page
Directions
Instructions: 1. Drain and flush cooling system. 2. Fill radiator with water, replace radiator cap loosely so that the cooling system does not build up pressure, idle engine until normal operating temperature to achieved. 3. With engine running, carefully remove radiator cap and add water to cover radiator core. 4. Shake Seal-Up and pour into radiator. (Pour into cooling system only). 5. Replace radiator cap and idle until leak stops (20 minutes minimum). 6. Stop engine, allow engine to cool, then carefully remove radiator cap and open drain plugs. 7. Allow engine to sit for 12 hours (minimum 4 hours). 8. Flush remainder of Seal-Up and water from engine. 9. Refill cooling system with proper mixture of water and coolant.
Product Details
For large capacity cooling systems. Engine blocks. Radiators. Heads. Heater cores. Freeze plugs. Seal all cracks permanently. Part No. 1008 use in systems up to 6 gallon capacity. Part no 1116 - use in stems above 6 gallon capacity. www.bluemagicusa.com. For chemical emergengy 1-800-424-9300.Nutrition Facts
Ingredients
Contains Sodium Silicate, (Liquid Glass), if Swallowed, Call Physician, Give Large Quantities of Water.Warnings
Warning: Harmful if swallowed. See additional cautions and first aid on back panel. Important: Seal-Up will clog cooling system if anti-freeze is present. Do not induce vomiting. For eye contact, flush with water. Keep out of reach of children.Manufacturer
Technical Chemical Company
Cleburne, TX 76033
UPC
00728489011163