Senco Nails, Flat Wire Wound, Ring Shank
3600 nails
On This Page
Directions
Senco offers different triggering systems. The following will assist you in choosing the trigger that best fits your application and method of operation. With a sequential or restrictive trigger, fasteners can only be driven one way. Depress the safety against the work piece first, then pull the trigger. Under certain conditions, the sequential trigger may reduce the possibility of injury to you and others working in your area. A sequential trigger is available for all Senco tools with a safety element. With a contact actuation or dual action trigger, fasteners can be driven two ways. First, depress the safety, then pull the trigger. Second. Pull the trigger and keep it pulled while continually depressing the safety against the work piece. Under certain conditions, double fire, excessive rebound and leaving your finger on the trigger of a contact actuation trigger can result in injury to you and others working in your area. A contact actuation trigger is available for most Senco tools with the exception of some finish milers and staplers. With a selective actuation or switchable trigger, fasteners can be driven in either the sequential or contact actuation mode. A button on the tool allows the user to switch between the two triggering systems as necessary depending upon the application. A selective actuation trigger is available on a limited number of Senco tools. Follow instructions for all buildings materials to minimize the potential for staining.
Product Details
15 degrees. 2-1/4 Inches x 0.92 Inches. 57 mm x 2.3 mm. Hot dipped. ASTM A 153 class D. Fits other tools. Galvanized on fasteners in intended to extend the life of the fasteners. It does not eliminate corrosion and/or staining due to various conditions such as high humidity, salt spray, acidity content of preservatives in the wood (such as cedar, redwood, or man made materials). www.senco.com. For additional information about safe tool use, triggering systems or to obtain a free trigger of your choice. Call 1-800-543-4596 or visit us at www.senco.com. ISANTA Member. Made in Canada.Nutrition Facts
Warnings
Danger: Read and understand this warning and all other warnings and inspection instructions manual before using the tool. Failure to follow these instructions will result in serious injury to operator and/or others. Always wear OSAH-required Z87 safety glasses with permanently attached side shields. Keep finger off trigger when not driving fasteners since tool can eject a fastener. If safety is bumped.Manufacturer
Senco Brands
8450 Broadwell Road Cincinnati, OH 45244
UPC
00741474210051