Paslode Positive Placement Nails, Brite, 1-1/2 Inch
3000 nails
On This Page
Directions
For best performance use only genuine positive placement nails.
Product Details
0.148 inches. P10. For Paslode model(s): F250S-PP, PF150S-PP and PF250S-PP. For metal hardware installation. ProStrip paper tape collation. Heat treated nails. Can be used with: Simpson strongtie connectors, USP metal connectors, KC metal connectors. ICC recognized. For Installing: Joist hangers, straps, framing anchors/ties, seismic/hurricane ties. ProStrip nails. Head marking. Building code recognized per ICC-ES report ESR-2126 and building code approved per city of Los Angeles RR 25259. Engineered construction nails, ASTM F1667. Mechanically galvanized nails meet ASTM B695 class 55 (1 oz/ft sq zinc coating). Brite and electro galvanized nails are not recommended for use in pressure preservative treated lumber (such as ACQ). Produced at an ITW facility to the exacting standards of Illinois tool works. www.paslode.com. ISANTA Member. Made in China.Nutrition Facts
Warnings
Danger: Read manual and all safety instructions before using tool. Wear safety glasses with side shields which meet ANSI Z87.1 when driving fastener. Failure to wear safety glasses could result in severe injury or blindness to tool operator and bystanders. Failure to use genuine Paslode fasteners may cause tool damage, personal injury, and voiding of the tool warranty. Protect your eyes.Manufacturer
Paslode
888 Forest Edge Drive PO Box 8117 Vemon Hills, IL 60061-8117
UPC
00759501105195