Paslode Positive Placement Nails, Galvanized, Smooth Shank, Heat Treated
3000 nails
On This Page
Directions
Brite and Electro Galvanized nails are not recommended for use in pressure preservative treated lumber (such as ACQ). For best performance use only genuine. ICC ES. Positive placement Nails.
Product Details
Galvanized to a zinc coating weight of 1 oz. Per square foot. P10. 1-1/2 Inch X 0.148. For paslode model(s). F250S-PP & 5250/65S-PP, Pf250S-PP and PF150S-PP. For metal hardware installation. Can be used with: Simpson strong tie connectors; USP metal connectors; KC metal connectors. Head marking; Pro strip paper tape collation; Heat treated nails; ICBO recognized. For Installing: Joint hangers, straps, framing anchors/ties, seismic/hurricane Ties. Building code recognized per ICC report ESR 2126 and building code approved per city Los angles RR 25259; Engineered construction Nails, ASTM F1667; Mechanically galvanized nails meet ASTM B695 class 55 (1 oz/ft square zinc coating.Premium Corrosion Protection). Approved for use in ACQ and all pressure treated lumber. ISANTA Member. Made in USA.Nutrition Facts
Warnings
Danger: Read manual and all safety instructions before using tool. Wear safety glasses with side shields which meet ANSI Z87.1 when driving a fasteners. Failure to wear safety glasses could result in severe injury or blindness to tool operator and bystanders. Failure to use genuine Paslode fasteners may cause tool damage, personal injury, and voiding of the tool warranty. Protect your eyes.Manufacturer
Paslode
888 Forest Edge Drive PO Box 8117 Vernon Hills, Illinois 60061
UPC
00759501106376