DAP Crack Filler 1 qt BOTTLE
On This Page
Directions
Note: Do not use if temperature is below 40 degrees F, or if rain is likely. Keep product from facing always wear rubber gloves and eye protection. Surface Preparation: Clean all foreign material from crack, liquid cement crack filler must only be applied to a clean, dry and round surface. Application: Shake liquid cement crack filler bottle prior to opening and before each use to ensure consistent mixture. Bottle nozzle should be shipped with scissors to initially open. (The product will flow faster if the bottle is set into hot water for 10 minutes prior to use in cooler temperature conditions). Fill the crack in 1/4 inches layers allowing at least 24 hours between applications. For deep cracks; A layer of sand can be added after the first application to fill crack up to 1/4 inches from surface. When dry complete by filling in with liquid cement crack filler. For very thin cracks: Liquid cement crack filler can be pressed or troweled flat into and around crack. After products is fully cured (approximately 24 hours), may be painted with oil-or latex-based paint.
Description
Easy-to-use. Self-leveling. For quick and easy repairs to concrete surfaces. Perfect for sidewalks, driveways, patios, steps and basements. Exterior/interior. DAP Liquid cement crack filler is an easy-to-use, ready –mixed product for the repair of concrete cracks on horizontal surfaces. Repairs are ready for traffic in 30-45 minutes when directions are property followed. Liquid cement crack filler is self-leveling and dries gray to match most existing concrete. Note: Fills cracks up to 1/2 inches in width. For cracks greater than 1/2 inches in width DAP ready-mixed or dry mix concrete patch. VOC less exempt less water 39 gl.Other Description
Questions? Call line at 1-888-DAP-TIPS or visit dap.com and click on the ask the expert.Warnings
Cancer and Reproductive Harm-www.P65warnings.ca.gov.UPC
00070798375840