Hillman Flush-Mount Hangers 2 ea BLISTER PACK


On This Page

 

Directions

Installation 1. Place picture on wall for proper alignment. 2. Mark the wall at the center of the frame. 3, Place hanger, hook facing up, onto wall and install screws until the hanger is tight to wall, 4, Measure to the center of picture or mirror frame and screw the hanger onto the frame with the hanger facing down. 5. Place frame on wall adjoining the hangers together so they interlock. Note: In order to remove the frame from the wall, you must pull the spring away from the wall and push the frame up, allowing the two hangers to unlock.

 

Warnings

Caution: Use eye protection and proper tools when using this product. Do not put product in mouth.

UPC

00008236805291