Flex Seal Sealant Coating, Liquid Rubber, Black
17 oz (1 lb 1 oz) 482 g
On This Page
Directions
Directions: So easy to use! Read entire can. Wear face and eye protection, protective gloves and clothing. Make sure the area is clean, dry and free of grease, oil and dirt. Shake well: spray 8 inch to 12 inch from surface using an even sweeping motion. Apply several even coats until all cracks and holes have been filled. Allow 24 to 48 hours to dry before applying another coat. Fully cures in 48 hours. Hint: Make sure all cracks and holes have been filled and flex seal is fully cured before testing product. If light passes through apply additional coats. Use only in a well ventilated area. Prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. Do not smoke. When covering large areas, indoors, eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. When applying to large areas indoors, do not exceed use of 1/2 of a can before allowing one hour for the coating to dry and vapors to dissipate before using again. Works best at can temperatures above 60 degrees F. Shake can throughout application. Note: After each use, invert can and apply a short burst to clear nozzle. Not intended for use by Professional Roofers. This product has not been tested for use in potable water systems. May not be compatible with some plastics rubbers.
Product Details
20% more liquid rubber in a can! As seen on TV. 20% more coverage! Thick rubberized coating forms a watertight, flexible barrier. Excellent for: Do it yourself projects, roof leaks, campers, trailers, foundations, marine repairs and so much more! Coat, seal & protect stop leaks fast! Flex Seal sprays out as a thick liquid, seeps into cracks and holes and dries to watertight, flexible, rubberized coating. Flex Seal seals out water, air and moisture and helps prevent rust and corrosion. Once dry, Flex Seal can be painted over. Flex Seal coats, seals, protects and stop leaks fast! Carb coating category: Flexible coating Max 1.6 MIR. www.flexsealproducts.com. Made in Canada with globally soured components.Nutrition Facts
Warnings
Warning: This product can expose you to chemicals including EthyI Benzene which is known in the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.,First Aid: If Eye Contact: Flush with large amount of cool running water for at least 15 minutes while holding upper and lower lids open. Remove contact lenses, if present and easy to do. If irritation persists get medical attention immediately. If Skin Contact: Wash with soap and water. If irritation persists seek medical attention. Excessive Inhalation: Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration. If Ingested: Do not induce vomiting. Seek medical attention immediately. 24 hour medical emergency: 1-866-836-8855.,Danger: Extremely flammable. Harmful or fatal if swallowed. Vapor harmful. May cause eye, skin, and respiratory tract irritation. Contents under pressure. See other cautions on back panel. Keep out of the reach of children. Danger: Contains Toluene (108-88-3), Odorless Mineral Spirits (64742-48-9), Aliphatic Petroleum solvent (64742-89-8), Calcium Carbonate (1317-65-3), Carbon Black (1333-86-4) and Liquefied Petroleum gas (68476-86-8). Use only in a well ventilated area. Prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights or other sources of ignition. When covering large areas indoors eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. intentional misuse by concentrating and inhaling the product can be harmful or fatal. Avoid contact with eyes or prolonged contact with skin. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F.Manufacturer
Swift Response
Weston, FL 33331
UPC
00850010226927