ACE J Bend 1 ea BAG
On This Page
Directions
The J Bend is easy to install in your existing drain system. Installation Hints: Since it traps items that may fall into the drain and block gases from waste drain system, water and dirt will be present in the existing trap. Place a bucket under the old trap before attempting to remove it; Put thread seal tape on the drain threads before attaching nuts. This will provide a better seal against leaks. Use a scrap of cloth to protect the chrome finish of the nuts when you tighten with pipe wrench. Tools Needed: Pipe or spud wrench (to remove old brass J Bend). Pipe dope or thread seal tape. Instructions: 1. Turn of water at the tap. 2. Remove old J Bend. 3. Remove new nut A and washer from tailpiece. 4. Place new washer on wall tube or floor tube. Use old nut B, as it is not removable unless complete trap is being installed. 5. Position J Bend tighten nuts. Run waster to check for leaks.
Description
1-1/2 in. Quality since 1924. For P Trap and S Trap. For kitchen or bathroom. Compatible with plastic plumbing. 22 gauge.Warnings
Not ApplicableUPC
00082901437468