Flex Seal Sealant Coating, Black, Liquid Rubber
16 fl oz (473 ml)
On This Page
Directions
Directions: Surface must be clean, dry and free of grease, oil and dirt. Increase adhesion by etching surface with sandpaper. Brush, roll, dip or pour directly onto surface. Coat entire surface until all cracks and holes are completely filled. Apply additional coats as needed to increase thickness and to fill. Larger holes. Allow each coat to dry completely before adding additional coats. Allow 24 to 48 hours or more to dry. Covers up to 18.75 Square Feet. All cracks and holes must be completely filled and dry before testing product. If the treated area is wet or very soft, it will need more time to one. Clean Up: Wet Flex Seal Liquid can be easily cleaned with a dry cloth or paper towel. Brushes and rollers can be cleaned with mineral spirits. Do not clean with water. General information: Protective clothing and eye wear is recommended. Stir can well, do not shake. Dry time depends on temperature and humidity. Flex seal liquid reacts with the air to cure. Once the lid is removed and exposed to air, a skin may begin to form on the surface over time. Cured skin should be skimmed off and removed to prevent lumpy material. Always cover open containers during and after use.
Product Details
As seen on TV. Liquid rubber in a can! Brush. Roll. Dip. Pour. Stops leaks fast! Coat! Seal! Protect! Excellent for: Roofs & gutters. Ponds & bird baths. Basements & foundations. Tools & sporting equipment. Cars, trucks & vans. RV’s, campers & Trailers. Boats, yachts & water sports. Crafts, projects & hobbies and so much more! Non flammable. Non toxic. Non hazardous. Chemical and mildew resistant. Phil swift. Flex Seal Liquid is an easy to use rubberized coating that starts out as a thick liquid, seeps into cracks and holes, and dries to a watertight, flexible, rubberized coating. Flex Seal Liquid can be brushed, rolled, dipped or poured to create a super strong high performance, protective rubber coating that seals out air, water and moisture on a variety of surfaces and objects. Once cured, flex seal liquid forms a durable, breathable, watertight, Weatherproof barrier that coats, seals and protects! Flex seal liquid is resistant to rain, snow, sun, wind, hail, air, moisture, UV degradation, extreme temperatures and natural weathering. Flex seal liquid's patent pending, non-fammable, non-toxic formula is safe around plants and animals, is mildew and chemical resistant, helps prevent rust and corrosion, is UV resistant and lasts for years! Flex seal liquid is perfect for DIY & handyman projects, hobbies, crafts and so much more! Flex seal liquid can be used on a wide variety of surfaces. Use on concrete, glass, brick, stucco, masonry, wood, copper, plastic, tile, fabric, wires, vinyl, fiberglass, ceramic, porcelain, metal, aluminum, natural stones, foam, asphalt roofing, EIFS, TPO, PVC, EPDM, CSPE and Hypalon polyurethanes and more! www.flexsealproducts.com. www.P65Warnings.ca.gov. Made in the USA.Nutrition Facts
Ingredients
Contains: Butan-2-One 0, 0', 0'-(Methylsilylidyne) Trioxime, Aminopropyltriethoxysilane, VOC Content: Sealant or Caulking Compound 55 g/L (0.46 Lb/Gal).Warnings
Warning: Reproductive harm - www.P65Warnings.ca.gov.,First aid: Skin contact: Rinse skin thoroughly with water for at least 15 minutes. Get medical attention promptly if symptoms persist or occur after washing. Eye contact: Immediately flush with plenty of water for at least 15 minutes. Get medical attention promptly it symptoms occur after washing. Ingestion: Call a poison control center or doctor immediately.,Warning! May cause skin or eye irritation. Read other cautions on [back/side] panel. Not intended for professional roofers or underfoot applications. Paints and other topcoats will not adhere to product. Avoid contact with skin and eyes. May produce allergic reaction by skin contact. Keep out of reach of children.Manufacturer
Swift Response
Weston, FL 33331
UPC
00853517006283