Shooter's Choice Copper Remover, Max Strength
8 fl oz (236 ml)
On This Page
Directions
Directions: Do not use bronze brush with copper cleaner. 1. Safety First! Check to ensure your firearm is unloaded. 2. Start by using a solvent such as MC-7. then clean following recommended instructions. 3. Saturate a patch with Copper Remover. Run jag/tip with patch through bore. Pull back through, then repeat with clean patch. Whenever possible, clean from the chamber end. 4. Allow solvent to remain in bore no longer than 10 minutes. Never plug, soak or leave a patch in bore. Clean accessories with a cleaner/degreaser to stop the chemical reaction and prevent damage. 5. Run a clean dry patch through bore. If patch has a blue/green color then repeat above steps until patch comes out clean. 6. Spray Rust Prevent or protectant on all metal surfaces to neutralize solvents and protect firearm. Storage & Handling: Keep container tightly closed.
Product Details
Trusted brand since 1983. Quickly removes copper or gilded metal fouling from all rifle & pistol bores. 100% satisfaction guarantee. shooters-choice.com. Made in USA.Nutrition Facts
Ingredients
Contains: Oxalic Acid (CAS 6153-56-6), Monoethanolamine (CAS 141-43-5), Surfactant (CAS 34398-01-1).Warnings
Danger: Causes severe skin burns and eye damage. Read panel. Danger: Contains Oxalic Acid and Monoethanolamine. Causes severe skin burns and serious eye damage. Prevention: Do not breath dusts or mists. Wear protective gloves, eye and face protection. Wash thoroughly after handling. Keep cool and store locked up. If Swallowed: Rinse mouth. Do not induce vomiting. If on Skin: Remove all contaminated clothing. Rinse skin with water. If Inhaled: Remove to fresh air. Immediately call poison control center or doctor/physician. If In Eye: rinse cautiously with water for several minutes. Call poison control center or doctor/physician. Keep away from children.Manufacturer
Shooter's Choice
6987 Laura Street Lyons Falls, NY 13368
UPC
00027784000088