STP Heavy Duty Brake Fluid DOT3



Clean all dirt from around cover on master cylinder before removing. Fill unit to level specified by manufacturer. Replace cover. Check fluid level once a month. To bleed system: Refer to service manual. Do not reuse brake fluid from bleeding operation.



STP® Heavy Duty Brake Fluid for DOT3 ABS, Disc & Drum Systems. Protects brake system.

Other Description

STP® heavy duty brake fluid DOT 3 is scientifically engineered for optimum performance for all ABS, disc or drum brake systems in today's cars and trucks to help: Provide protection against brake failure from vapor lock. Prevent corrosion in brake system. Dry boiling point 401 degrees F minimum. Works with all brake systems requiring DOT 3 fluids. Exceeds federal motor vehicle safety standard no. 116. Meets SAE spec. J1703. This is a DOT 3 motor vehicle brake fluid. Questions or comments? Visit or call 1-888-GO4-STP in U.S.A. ©2012 The Armor All/STP Products Company.


Harmful if swallowed. Eye irritant. See warning on back label.
Caution: Never wash cylinders or parts with gasoline, kerosene or oil. Avoid spilling brake fluid on brake lining or car finish.
Follow vehicle manufacturer's recommendations.
Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
Store brake fluid only in its original container. Keep container clean and tightly closed to prevent absorption of moisture.
Caution: do not refill container and do not use for other liquids.
Harmful if swallowed. Eye irritant. Avoid eye and prolonged skin contact. Do not ingest. First aid: Eyes - immediately flush with water for 15 minutes. Contact physician immediately. Skin - wash with soap and water after use. If swallowed - immediately contact a physician or Poison Control Center. Keep out of reach of children. Note to physician: Contains diethylene glycol, tetraethylene glycol and polyalkylene glycol ethers.


The Armor All/STP Products Company
Danbury, CT 06810