Oregon Depth Gauge & Flat File
1 set
On This Page
Directions
Correct. Incorrect. 1. After every third or fourth saw chain sharpening, check the height of the saw chain depth gauges by placing the Depth Gauge Tool on the saw chain cutters near the midpoint of the chainsaw guide bar. 2. If a saw chain depth gauge extends above the slot in the Depth Gauge Tool, file it until it is level with the Tool. 3. File the leading edge of depth gauges until they are round (Not necessary for Oregon 72, 73, 75V chain).
Product Details
Convenient method for setting saw chain depth gauges for optimum cutting performance. OregonProducts.com File made in Switzerland. Depth gauge made in USA.Nutrition Facts
Warnings
This product can expose you to the chemical Nickel: which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.,Chain saw motor must be off. Important Safety Information. Warning: Improper use or maintenance of saw chain can increase risk of loss of control of the chain saw causing serious injury to the operator or bystanders. Follow all maintenance instructions and safety precautions for these products. Shut off saw motor before sharpening. Follow your chain saw manufacturer's current specifications for correct filling angles. Never exceed the manufacturer's recommended depth gauge setting for your chain. Always file depth gauges to the original rounded or ramped shape after lowering (except 72, 73, 75V).Manufacturer
OREGON
4909 Southeast International Way Portland, OR 97222 USA
UPC
00036577001416