Johnsen's Battery Terminal Protector
10 oz (284 g)
On This Page
Directions
Directions: 1. Battery and terminals must be clean. Use Johnsen's Battery Cleaner, Part No. 4606. 2. Remove battery terminals from post on battery. 3. Hold can 8-10 inches from area to be treated. Spray two coats and allow to dry. 4. Spray battery terminals. 5. Re-connect battery terminals.
Product Details
Instant corrosion protection. Coats & protects. Extends battery life. Improves starting. Visit us (at)technicalchemical.com. 1-800-527-0885. Made in USA.Nutrition Facts
Ingredients
Contains: Heptane (CAS 426260-76-6) and Petrolatum (CAS 8009-03-8).Warnings
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.,Danger: Extremely Flammable. Contents under pressure. Keep away from heat, sparks, or open flames. Exposure to high temperature may cause can to burst. Do not place can in direct sunlight or near sources of heat. Do not puncture or incinerate or store at temperatures above 120 degrees F. Use in a well ventilated area, vapors may accumulate and ignite. Deliberate misuse by concentrating or inhaling vapors can be harmful or fatal. Do not store or transport in passenger compartment. Keep out of the reach of children. First Aid: Eye and skin irritant. If eye or skin contact occurs, flush with water for 15 minutes. If irritation persists, seek medical attention. Harmful if swallowed. If ingested, do not induce vomiting. Seek medical attention immediately. Dispose of empty container in accordance with local, state, and federal regulations. Johnsen's Battery Terminal. Protector is especially formulated to prevent battery terminals from corrosion and acid build-up. Easy to apply, quick dry formula, and instant protection. Do not allow can to touch battery posts. This may cause can to burst and cause injuries.Manufacturer
Technical Chemical Company
Cleburne, TX 76033 United States
UPC
00039101012971