Johnsen's Brake Fluid, Dot-5, Silicone
12 fl oz (355 ml)
On This Page
Directions
Directions: If the system is filled with dot 3 or dot 4 brake fluid, completely drain and flush entire system before replacing with Johnsen's dot 5 brake fluid. Replacement of seals and boots is recommended. This product is not compatible with dot 3 or dot 4 brake fluid.
Product Details
500 degrees protection for drum & disc brakes. Made in USA.Nutrition Facts
Ingredients
Contains Polydimethyisiloxane (CAS 63143-62-9) and Tributyl Phosphate (CAS 126-73-8).Warnings
Warning: Causes eye irritation read cautions on side panel. Johnsen's dot 5 brake fluid provides superior performance over conventional glycol brake fluids (dot 3 and dot 4). Johnsen's dot 5 brake fluid will not absorb moisture and can be used in most brake fluid applications. Exceeds federal MVSS No. 116 and SAE J1705 specs and mil spec mil-PRF 46176B minimum wet boiling point: 356 degrees F. Warning: Contact may cause skin or eye irritation. Wash-thoroughly after use. Avoid contact with eyes. In case of eye contact, flush with water for 15 minutes. Do not take internally. In either case, call a physician. Keep out of reach of children. Dispose of empty container in accordance with local, state and federal regulations. Safety warnings: 1. Follow vehicle manufacturer's recommendations when adding brake fluid. 2. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. 3. Store brake fluid only in its original container. Keep container clean & tightly closed to prevent absorption of moisture. 4. Caution: do not refill container and do not use for other liquids.Manufacturer
Technical Chemical Company
Cleburne, TX 76033
UPC
00039101070124