Gorilla Glue White
On This Page
Directions
Storage: after each use, wipe nozzle with a dry cloth, and tightly replace lid. Store in cool, dry place. All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. White Gorilla Glue will stain skin and ruin clothes. 3 easy steps: 1. Damp it: White Gorilla Glue is cured with moisture. Lightly dampen one surface with water. Do not add water to bottle. 2. Glue it: Spread a thin layer of white Gorilla Glue on other surface. A little goes a long way. Do not over apply glue. 3. Clamp It®: Clamp objects together for 30-60 minutes. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Not recommended for use on polyethylene or polypropylene plastics. 3 easy steps. Damp it**. To activate Gorilla Glue. Glue it. Expands, use sparingly. Clamp It® for an incredibly strong bond. For more information see back panel. **Lightly dampen surface. Do not add water to bottle. Clean-up: see first aid for removal from skin. Wipe wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed from work piece with chisel, scraper or sandpaper. Min. Coverage: 1/2 oz. per sq. ft. Open working time: up to 5-10 minutes. Clamp: 30-60 mins. at 68-120 degrees F. Best at room temperature. Cure time: 80% in 1 hour. Allow bond to cure for 24 hours. Full cure dependent on temperature and humidity. Moisture content: best results from 10-25%. Below 10%, dampen surface with water.
Description
Gorilla® White Glue®. Incredibly strong. Bonds virtually everything. Wood, stone, metal, ceramic, foam, glass & more! 100% tough. For the toughest jobs on Planet Earth®. 2X faster*. Dries white. Expands 3x into the materials. 100% water proof for indoor & outdoor. *Works like original Gorilla Glue, but dries 2x faster.Other Description
100% waterproof. 1-800-966-3458. Visit www.gorillatough.com for more information. ©2014 The Gorilla Glue Company.Warnings
Harmful or fatal if swallowed.Potential skin sensitizer. See warnings on back panel.
Note:
Do not over apply glue. A little goes a long way. While curing, glue will expand 3-4 times creating an incredibly strong bond line. Be careful of squeeze-out.
Harmful or fatal if swallowed. Keep out of reach of children and animals. Do not microwave or heat. Do not leave in hot vehicle. May cause sensitization by inhalation and skin contact. Individuals with chronic asthmatic conditions should consult physician prior to using product. Contains 4, 4' - diphenylmethane diisocyanate (MDI).
Prevent contact with skin and eyes. May cause gastro-intestinal blockage if swallowed. For medical emergencies only, call 1-800-420-7186.
First aid: eye contact: flush thoroughly with water for at least 15 minutes and seek immediate medical attention.
Skin contact: wash affected areas with a gritty textured soap and water.
Inhalation: if inhalation causes physical discomfort move to fresh air. If breathing difficulty occurs or if product is swallowed seek medical attention.
UPC
00052427520128