3M Safety-Walk Slip Resistant Tread
6 each
On This Page
Directions
Directions: Important: Apply above 50 degrees F (10 degrees C). Clean and dry surface thoroughly. Waxed surfaces should be stripped. Use lacquer thinner or rubbing alcohol to remove grease and oil. Prime porous or unfinished surfaces with contact adhesive. Remove backing and press firmly working toward edges. Make certain all edges are adhered. Cut two pieces and apply on either side of crack or grout lines. Other Uses: Locker rooms, Boats, Personal Watercraft, Water Skis, Exercise Equipment, around Hot Tubs and Pools. Look for other 3M Safety-Walk Products to help prevent slips and falls. Use for steps, ladders, ramps, skateboards.
Product Details
Cont. 6. 2 in x 9 in (50.8 mm x 22.8 cm). Slip resistant tread. Wet Environment: Indoor & outdoor. Durable, long-lasting performance. Tread Grit: 300. 1-800-494-3552 651-737-6501. 1-800-364-3577. Made in U.S.A. with globally sourced materials.Nutrition Facts
Warnings
Warning! This product is intended to increase traction on slippery surfaces. Misuse or failure to follow user instructions may result in serious injury or death. Do not apply in areas that are continuously under water, such as swimming pools or spas. See additional instructions on enclosed insert.Manufacturer
3M
ST. Paul, MN 55144-1000
UPC
00051131594388