Command Picture Hanging Strips, Small
8 pairs
On This Page
Directions
Apply. 1. Clean wall with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Press two strips together until they click. Each pair of strips holds 1 lb. 3. Remove one side of liners. Place each pair of strips as shown. Press firmly. 4. Remove remaining liners and press frame on wall. Press each side firmly for 30 sec. 5. To ensure adhesive hold, grab bottom corners and peel frame from wall. Do not pull straight off. Press each strip firmly for 30 seconds. 6. wait 1 hour to reattach frame. Line up frame with strips on wall and press until each pair of strips click. Remove. 1. Grab bottom corners and peel frame from wall. Do not pull straight off. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch the strip sloly against the wall at least 6 inches to release. Wait 7 days after painting before use. Do not apply strips to paper or soft surfaces on frame. Remove hanging hardware from back of frame.
Product Details
Holds 4 lb (1.8 kg). Damage-free hanging. Holds strongly. Removes cleanly. Wait 7 days after painting before use. Do not apply strips to paper or soft surfaces on frame. Remove hanging hardware from back of frame. command.com. Made in USA with globally sourced materials.Nutrition Facts
Warnings
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Use indoors 50 degrees - 105 degrees F.,Failure to follow instructions carefully may cause damage.Manufacturer
3M
3M Center St. Paul, MN 55144
UPC
00051131949287