Command Bath Refill Strips, Medium & Large
1 set
On This Page
Directions
Apply: 1. Choose a location where strips are not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Remove blue liner. Press adhesive hook. 4. Remove black liner. Press to wall for 10 seconds. 5. To ensure adhesive hold, slide hook up and off. 6. Press base firmly for 30 seconds. 7. Slide hook on to mounting base. 8. Wait 1 hour before use. Remove: 1. Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch the strip slowly against the wall at least 15 inches to release.
Product Details
Medium Holds 3 lb (1, 3 kg). Large Holds 5 lb 2, 2 kg. Damage-free hanging. Holds strongly - removes cleanly. Proven to hold better than suction cups. Bath. Water resistant strips. 2 M/M. 4 L/G. Limited Warranty and Limitation of Liability (for product sold in USA): This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. command.com. Save instructions or visit command.com. Visit command.com for the strip holding power for your product. Strips made in USA with globally sourced materials.Nutrition Facts
Warnings
Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Use indoors 15 degrees - 125 degrees F.,Failure to follow instructions carefully may cause damage.Manufacturer
3M
St. Paul, MN 55144
UPC
00051131995932